|
AMSOIL, Inc. Building
Request a
FREE
AMSOIL Product Catalog!
Download AMSOIL Catalog PDF Version (2.13 MB):
Look up AMSOIL Lube
& Filter Information:
Request Information
on Becoming an AMSOIL:
National Trade
Publication
Praises AMSOIL!
LNG
Publishing Company, Inc.
In the March 2003 issue of
Lubes 'n' Greases,
Automotive Editor David McFall wrote an
in-depth article on the subject of extended oil drain intervals and
touted AMSOIL as a safe, cost-effective and environmentally preferred
choice. He praised AMSOIL for their commitment to excellence and labeled
AMSOIL "unshackled"
for never conforming to industry norms and standards.
Compare AMSOIL to Mobil 1,
Pennzoil, Quaker State, Castrol and more!
AMSOIL 10W-30 Motor Oil and ten
competing oils were subjected to a series of tests. AMSOIL
outperformed all the competitors in nearly every test! See the
impressive test results!
|
AMSOIL Propylene Glycol Antifreeze
|
|
 |
 |
|
|
 |
Long-Lasting Universal Coolant Fluid
Safer For Pets and Children
AMSOIL Propylene Glycol (PG) Antifreeze and Engine Coolant is formulated to provide benefits
far beyond those found in today’s conventional
antifreeze and coolant products. This
revolutionary formulation provides maximum
antifreeze and cooling protection in the most
extreme temperatures and operating conditions. And,
unlike conventional ethylene glycol based
products, which are highly toxic and even fatal,
AMSOIL Antifreeze and Coolant is formulated with
propylene glycol. It is biodegradable and requires
no special disposal costs or procedures in most
areas. Above all, its low toxicity limits the
threat to children, pets or wildlife.
AMSOIL Antifreeze and Engine Coolant meets the long recognized
need for a universal coolant fluid – it's formulated for use in heavy-duty
commercial vehicles as well as in cars. And it has a much longer
service life than ethylene glycol antifreeze.
|
Locate an AMSOIL
Retailer in
New York State |
- Formulated for use in heavy-duty and automotive applications
- Also good for motorcycles, ATVs, snowmobiles
and some marine applications
- Superior to traditional ethylene glycol
antifreeze
- Provides superior performance in all
climates
- Safe, non-toxic, biodegradable and
non-polluting
- Requires no special disposal costs or procedures in most areas
- Stops leaks
- Super long life -- up to seven years
- Contains special corrosion inhibitors and
antifoam agents
- Universal compatibility
- Aluminum engine block compatible
Far Superior to Conventional Antifreeze
Industry tests show that propylene glycol's (PG)
anti-corrosive properties are far superior to traditional
ethylene glycol (EG). Independent tests reveal AMSOIL Antifreeze and Engine Coolant surpassed standards for
metallic corrosion. It plates metal to protect even when exposed
to acids and salt spray.
-
Standard allowances for loss in aluminum and solder are
less than 60 mg. AMSOIL Antifreeze and Engine Coolant lost 0
mg in aluminum and less than 6 mg in solder.
-
Standards for iron, steel, copper and brass allow a
maximum loss of less than 20 mg. AMSOIL Antifreeze and Engine
Coolant never exceeded a 3 mg loss in any of those metals in
a testing period that was run for 10 weeks, three weeks
longer than required tests.
Reduces Risk of Bearing Damage
AMSOIL Antifreeze and Engine Coolant also
gives an added measure of protection to engine bearings in the
event of crankcase contamination with antifreeze/coolant:
According to Arco Chemical Company (Document OP88-791-7.5M "The
Facts about Propylene Glycol Antifreeze"), "PG-based antifreeze
has shown reduced risk of bearing damage if introduced into the
oil by head gasket leakage or failure. A Detroit Diesel 8V92T
engine was run on a dynamometer for one hour at full horsepower
(432 HP) with 8 percent [propylene glycol antifreeze] poured
directly into the crankcase . . . no excessive wear was shown on
bearings run with the 8 percent PG coolant when the engine was
torn down." In contrast, "one-half to one percent of ethylene
glycol in the oil causes rapid bearing failure, resulting in the
shutdown of the engine."
Stops Leaks
AMSOIL Antifreeze and Coolant
adheres to metal. It self-seals hairline cracks in
welds and seams to prevent leaks, without
additional stop-leak products or fibrous
materials.
Lasts Longer Than Conventional Antifreeze
AMSOIL Antifreeze and Engine Coolant contains a proprietary
poly organic acid technology. It eliminates the need for
periodic changing or recharging cooling systems. There is no
need for supplemental coolant additives. AMSOIL Antifreeze and Coolant provides
extended service life in all gasoline and diesel vehicles:
- Up to seven years or 750,000 miles in over-the-road
diesel trucks (Class 8 vehicles)
- Up to seven years or 250,000 miles in pleasure vehicles
(passenger cars, light-duty
trucks, vans and recreational vehicles)
Applications
AMSOIL Antifreeze and Engine Coolant
may be used in over-the-road diesel trucks as well as passenger
cars, light-duty trucks, vans and recreational vehicles. Also
for motorcycles, ATVs, snowmobiles and closed marine
applications.
Compatible with All Major Brands of Antifreeze
AMSOIL Antifreeze and
Coolant is dyed neutral yellow and is compatible
with all ethylene and propylene antifreeze and
coolant formulations on the market, including DEX-Cool®, Sierra®
and Zerex®. It is also
compatible with fully formulated diesel
antifreezes and other organic acid technology
(OAT) and hybrid organic acid technology (HOAT)
formulations.
|
Quarts Required for Low-Temperature Protection
 |
Performance Specifications
AMSOIL Antifreeze and Engine Coolant meets
or exceeds the following automotive and heavy-duty service specifications:
- ASTM D-6210
- ASTM D-3306
- ASTM D-4985-98
- ASTM D-6210-98
|
Composition by Weight:
Total Glycols
≥ 92 percent
Corrosion inhibitors and antifoamants
= 3 percent
Water
> 5 percent
|
Boiling Point (Sea Level):
219° at 40 percent concentration
222° at 50 percent concentration
225° at 60 percent concentration
Increase by 40° to 45° if a 15 psi
radiator cap is used |
|
Check It
Out! |
Want to know which engine oil, transmission
oil and gear lube is appropriate for your vehicle and the
quantities required? Need to find the correct product codes
for your vehicle's filtration requirements? Or, do you have
a manufacturer part number of the filter you are currently
using and would like to cross reference it? The
AMSOIL Online Product Application Guide is the place
with the answers! |
 
| AMSOIL, the leader in automotive synthetic
lubrication, produced the world’s first API-qualified synthetic
motor oil in 1972. Trust the extensive experience of AMSOIL, The
First in Synthetics®, to do the best job protecting your
engine. |
|
