Replaces Much Higher-Priced PAG Compressor Oils and Coolants Such as Ingersoll Rand SSR Ultra Coolant and Sullair Sullube 32
For Use in Rotary Screw Compressors and Vacuum Pumps
AMSOIL SIROCCO Synthetic Air Compressor Oil (Product Code: SEI) is formulated with premium synthetic ester technology. This high-quality, long-life fluid lasts several times longer in use than mineral-based oils. AMSOIL SIROCCO Synthetic Air Compressor Oil ISO 32 – ISO 46 is fully formulated with non-detergent additives and is designed for use in rotary screw compressors and vacuum pumps. It effectively protects against wear, oxidation, foam and rust and has inherent lubricity and good thermal conductivity, which allow it to reduce heat and energy consumption. It increases operating efficiency, reducing money spent on energy, repair and maintenance costs.
AMSOIL SIROCCO Ester Synthetic Air Compressor Oil is recommended as a direct replacement for PAG compressor oils such as Ingersoll Rand SSR Ultra Coolant and Sullair Sullube 32. It is not recommended for use with silicone-base fluids.
- Reduces heat and energy consumption
- Resists foaming
- Readily separates from water
- Protects against rust and corrosion
- Anti-foam, anti-wear protection
- Extends oil change intervals
- Reduces maintenance costs
- Wide operating temperature range eliminates seasonal fluid changes
- Recommended for use in rotary screw compressors and vacuum pumps
- Compatible with PAG oils e.g. Ingersoll Rand SSR Ultra Coolant and Sullair Sullube 32
- Biodegradable under the CEC-L33-A94 standard
- ISO 32 – ISO 46, SAE 5w20
AMSOIL SIROCCO Ester Synthetic Air Compressor Oil ISO 32 – ISO 46 Product Code Pkg/Size SEI05-EA 5-Gallon Pail SEI55-EA 55-Gallon Drum SEI27-EA 275-Gallon Tote
Resists Water Contamination
Water from condensation builds up in compressors and can cause unwanted oil water emulsions, environmental discharge hazards and rust. AMSOIL SIROCCO Ester Synthetic Air Compressor Oil resists water to prevent damaging oil water emulsions, allowing for better lubrication, longer lubricant life and ease of water removal from the sump – water can be easily drained off for simplified environmental discharge and increased oil life. AMSOIL SIROCCO is anti-rust fortified.
Reduces Maintenance Costs
AMSOIL SIROCCO Synthetic Air Compressor Oil lasts several times longer than petroleum oils (8,000+ hours for most compressor applications), effectively reducing maintenance costs and lowering labor and waste oil disposal costs.
Eliminates Seasonal Fluid Changes
AMSOIL SIROCCO Synthetic Air Compressor Oil maintains performance across a wide operating temperature range. Its low pour point, high viscosity index and lack of paraffins (wax) make it an excellent all-season lubricant. At high temperatures, AMSOIL SIROCCO forms virtually no carbon, allowing for clean operation. At cold temperatures, equipment starts easier and the lubricant is quickly pumped to critical components, preventing lubricant starvation and excessive wear.
AMSOIL SIROCCO Synthetic Air Compressor Oil has a higher flash, fire and auto ignition point than competitive petroleum oils. Its resistance to carbon formation and the ashless additive system minimizes the incidence of deposits acting as ignition-promoting hot spots. (While AMSOIL SIROCCO can provide improved fire safety, it cannot be considered non-flammable.)
Extended Service Life
AMSOIL SIROCCO Synthetic Air Compressor Oil may be used up to 8,000+ hours for most compressor applications, subject to operating conditions and maintenance practices. Monitoring by oil analysis at 1,000-hour intervals is recommended.
Compatible with PAG Compressor Oils or Coolants
AMSOIL SIROCCO Ester Synthetic Air Compressor Oil is compatible with and recommended as a replacement for much higher-priced PAG (polyalkylene glycol) compressor oils or coolants such as Ingersoll Rand SSR Ultra Coolant and Sullair Sullube 32. No flushing is necessary when changing over from glycol coolants to AMSOIL SIROCCO, but draining the system and changing the filters is recommended.
AMSOIL SIROCCO Ester Synthetic Air Compressor Oil is compatible with petroleum oils, most synthetic oils*, and many seals, paints and materials commonly used in compressors. Materials recommended and not recommended for use with AMSOIL SIROCCO are listed below:
Seals: Viton, High Nitrile Buna N (>36%), Teflon
Paints: Epoxy, Oil-Resistant Alkyd, Two Part Urethane
Plastics: Nylon, Delrin, Celcon, PBT
Seals: Neoprene, SBR Rubber, Low Nitrile Buna N
Paints: Acrylic Paint, Lacquer
Plastics: Polystyrene, Polycarbonate Plastic, PVC, ABS
Process Gases Suitable for Use:
Gases: Benzene, butadiene, butane, butylene, carbon dioxide (dry), carbon monoxide, ethylene, furnace (crack gas), helium, hydrogen, hydrogen sulfide (dry), methane, propane, natural gas, nitrogen, propylene, sulfur dioxide, sulfur hexafluoride, synthetic gas
*AMSOIL SIROCCO is NOT RECOMMENDED as a replacement for or for use with the silicone-based compressor oil Sullube 24KT. AMSOIL SIROCCO is NOT RECOMMENDED for use in “breathing air” or refrigeration compressors.
AMSOIL SIROCCO Ester Synthetic Air Compressor Oil (SEI) is a multi-viscosity oil meeting the requirements of 5w20. It may be used in applications calling for either an ISO 32 or ISO 46 compressor oil or coolant. It is recommended for use in single- and multi-stage rotary screw compressors and vacuum pumps that call for this viscosity.
Note: When installing AMSOIL SIROCCO Synthetic Air Compressor Oil, it is recommended that the old oil be thoroughly drained and, if warranted, the system cleaned. If a lot of carbon or residue is found on the internal compressor parts, follow the manufacturer’s recommendations for removal prior to installing the new oil. AMSOIL SIROCCO has a high level of solvency and may remove deposits left in the system. Check the filters and oil air separators regularly for the first 500 hours of operation and replace as necessary.
Shipping for Online and Catalog Customers
Online and catalog customers receive FREE standard ground shipping on orders of $100 or more when shipped to a valid address in the continental United States, including APO and FPO military post boxes. AMSOIL does not ship to PO Boxes. The $100 minimum does not include taxes, fees or other charges. For online and catalog retail orders totaling less than $100, a flat shipping rate of $8.50 will apply in the continental U.S.
Please Note: AMSOIL Dealers and Preferred Customers are not eligible for free shipping. Orders containing only clothing and promotional materials totaling less than $20 are subject to $5 shipping and handling.
For more information, please visit the AMSOIL, Inc. website: AMSOIL Shipping, Sales Tax and Product Return Guidelines
Please visit the AMSOIL, Inc. website: AMSOIL Shipping, Sales Tax and Product Return Guidelines