Advanced Formulation for Powershift and Heavy-Duty Manual Transmissions, Wet Brakes and Final Drives
Stops Brake Noise and Clutch Slippage
AMSOIL Synthetic Powershift Transmission Fluids (Product Codes: CTG, CTJ, CTL) are specifically designed for high-torque, heavy-duty powershift transmissions. Available in three viscosity grades, SAE 10w, SAE 30 and SAE 50, these lubricants contain top-quality synthetic base stocks and a high level of top-quality additives selected specifically for powershift transmissions. Use AMSOIL Synthetic SAE 10w, 30 and 50 Powershift Transmission Fluids in Caterpillar, Allison, Komatsu, Clark, Hurth, Borg Warner, Twin Disc, Voith, ZF, Funk and Brockhouse powershift-type transmissions and Eaton-Rockwell-Fuller transmissions. In addition, AMSOIL Synthetic SAE 50 Powershift Transmission Fluid is formulated for Fuller CD-50 performance and is ideal for use in Rockwell-Eaton-Fuller, Spicer, Fabco, Warner and other large truck manual transmissions.
Conventional powershift fluids sometimes have unstable friction characteristics, which may lead to excessive brake noise, clutch slippage (especially on steep grades under heavy load) and frequent clutch adjustment. AMSOIL Powershift Transmission Fluids are formulated to stop these problems – they offer exceptional transmission friction performance, smooth brake operation, reduced gear and bearing wear and increased equipment life. They are capable of extended drain intervals.
- Provides fast, smooth clutch engagement
- Eliminates brake noise
- Prevents clutch slippage and glazing
- Superior gear and bearing protection
- Resist high-temperature oxidation
- Resists the formation of varnish and sludge
- Superb cold-flow properties
- Capable of extended drain intervals
AMSOIL Synthetic Powershift Transmission Fluid – SAE 10w Product Code Pkg/Size CTG05-EA 5-Gallon Pail CTG55-EA 55-Gallon Drum CTG27-EA 275-Gallon Tote AMSOIL Synthetic Powershift Transmission Fluid – SAE 30 Product Code Pkg/Size CTJ05-EA 5-Gallon Pail CTJ55-EA 55-Gallon Drum AMSOIL Synthetic Powershift Transmission Fluid – SAE 50 Product Code Pkg/Size CTL05-EA 5-Gallon Pail CTL55-EA 55-Gallon Drum CTL27-EA 275-Gallon Tote
Eliminates Problems Found in Conventional Fluids – Brake Noise and Clutch Slippage
AMSOIL Synthetic Powershift Transmission Fluids’ stable frictional characteristics eliminate excessive brake noise and vibration. Their nonslip friction durability virtually eliminates clutch slippage, which can cause glazing or friction surface deposits and material degradation. AMSOIL Powershift Transmission Fluids are formulated to deliver responsive yet smooth clutch engagements, excellent power transmission through clutches and synchronizers and superior hydraulic fluid performance for servo-equipped units. AMSOIL Powershift Transmission Fluids are compatible with common metallic and nonmetallic friction materials.
Outstanding Wear Protection
AMSOIL Powershift Transmission Fluids are formulated without viscosity index improvers for superior shear stability. This superior shear stability allows AMSOIL Powershift Transmission Fluids to maintain grade throughout service life, providing long-term protection against equipment wear, even when equipment is frequently subjected to sustained periods of applied pressure or high horsepower and high torque.
Superior High- and Low-Temperature Performance
In high temperatures, AMSOIL Powershift Transmission Fluids effectively protect components from wear. Their superior oxidative and thermal stability inhibits the formation of varnish, deposits and sludge so equipment runs clean. AMSOIL Powershift Transmission Fluids are excellent heat-transfer fluids and may help hot-running equipment operate cooler and run in its optimal temperature range. In low temperatures, these lubricants flow readily for dependable startup and post-startup protection.
Copper Corrosion, Rust and Foam Inhibition
AMSOIL Powershift Transmission Fluids protect equipment from copper corrosion and rust, even during equipment storage. They do not foam in service, protecting equipment from metal-to-metal contact and wear that occurs with use of foam-filled fluids.
Extends Time Between Overhauls and Increases Equipment Life
AMSOIL Powershift Transmission Fluids provide fast, smooth gear engagements, reducing the rate of gear and bearing wear, extending time between overhauls and increasing equipment life.
Extended Service Life
AMSOIL Synthetic Powershift Transmission Fluids provide extended service life beyond conventional petroleum fluids if they are kept free of dirt and moisture. Oil analysis* is recommended if extending service intervals beyond equipment manufacturer recommendations.
AMSOIL Powershift Transmission Fluids may be used up to 60,000 miles or one year (whichever comes first) in CD-50 manual transmission applications.
AMSOIL Powershift Transmission Fluids are fully compatible with other TO-4 fluids used in powershift applications.
To install AMSOIL Powershift Transmission Fluids, drain the fluid in the system, replace the filter (if so equipped) and install the appropriate AMSOIL Powershift Transmission Fluid.
*Oil Analyzers, Inc., a division of AMSOIL, Inc., provides cost effective, quality oil analysis services.
Viscosity Grades and Applications
AMSOIL Synthetic Powershift Transmission Fluids are available in three viscosity grades: SAE 10w (CTG), SAE 30 (CTJ) and SAE 50 (CTL). These oils’ special powershift formulation helps keep the advanced materials used in powershift transmissions working right – the binders in paper materials stay strong and elastomers pliable. Applications include:
- Semi-trucks manual transmissions
- Wheel loaders and crawlers
- Backhoe loaders
- Off-road fork trucks
- Harbor handling equipment
- Railway equipment
- Mining equipment
- Road graders
- Commercial boats
AMSOIL Synthetic 10w, 30 and 50 Powershift Transmission Fluids can be used in Caterpillar, Allison, Komatsu, Clark, Hurth, Borg Warner, Twin Disc, Voith, ZF, Funk and Brockhouse powershift-type transmissions and Eaton-Rockwell-Fuller transmissions. In addition, AMSOIL Synthetic 50 Powershift Transmission Fluid is formulated for Fuller CD-50 performance and is ideal for use in Rockwell-Eaton-Fuller, Spicer, Fabco, Warner and other large truck manual transmissions.
AMSOIL Synthetic Powershift Transmission Fluids are recommended for appplications requiring the following performance specifications.
Shipping for Online and Catalog Customers
Online and catalog customers receive FREE standard ground shipping on orders of $100 or more when shipped to a valid address in the continental United States, including APO and FPO military post boxes. AMSOIL does not ship to PO Boxes. The $100 minimum does not include taxes, fees or other charges. For online and catalog retail orders totaling less than $100, a flat shipping rate of $8.50 will apply in the continental U.S.
Please Note: AMSOIL Dealers and Preferred Customers are not eligible for free shipping. Orders containing only clothing and promotional materials totaling less than $20 are subject to $5 shipping and handling.
For more information, please visit the AMSOIL, Inc. website: AMSOIL Shipping, Sales Tax and Product Return Guidelines
Please visit the AMSOIL, Inc. website: AMSOIL Shipping, Sales Tax and Product Return Guidelines