AMSOIL Synthetic 2-Stroke Oils Have Been Protecting Two-Cycle Engines Since 1973 – At a Gas Oil Mix Ratio of 100 to 1
Eliminates the Need for Mixing Oil and Gas for Different Engine Manufacturers – Just one Gas Can Covers All Premix Ratios
AMSOIL Saber Professional Full Synthetic 2-Stroke Engine Premix Oil (Product Code: ATP) has a performance emphasis on the hotter operations of premix, air-cooled engines and is specifically designed for small engines in hand-held power equipment including, but not limited to:
- Chain saws
- Trimmers
- Lawn equipment
- Snow blowers
- Leaf blowers
- Weed eaters/Weed wackers
- Brush cutters
- Edgers
- Shredder vacs
- Chop saws
- Pumps
While 2-stroke engines are widely used in handheld power equipment due to their high power-to-weight ratio, equipment owners and operators are faced with exhaust smoke, the task of properly mixing oil and gas for different engine manufacturers, and premature wear and engine failure. AMSOIL Saber Professional Synthetic 2-Stroke Premix Oil effectively addresses these issues and more. AMSOIL Saber Professional withstands high heat and stress to protect engines against wear and harmful deposits. It improves throttle response and lowers or eliminates smoke. It minimizes deposit formation and lowers emissions. It is recommended for premix use where API TC, ISO-L-EGD, or JASO FD oils are specified.
AMSOIL Saber 2-Stroke Premix Oils are formulated with exclusive AMSOIL synthetic base oils and premium additives. They are very cost effective compared to oils mixed at 50 to 1 mix ratio or richer. That’s because they do not contain solvents, as conventional two-stroke premix oils do, so they can be mixed at an economical 100 to 1 gas oil mix ratio. And, because one mix ratio satisfies multiple pieces of equipment, AMSOIL Saber Premix 2-Stroke Oils eliminate mix ratio confusion – just one gas can could satisfy all your two-cycle engine needs! AMSOIL Synthetic 2-Stroke Oils are available in two premix formulations, Saber Professional and Saber Outboard. AMSOIL Saber Professional provides the additional benefit of fuel stabilization. It saves time and money while delivering the ultimate convenience and engine protection.
- Prevents wear, plug fouling, ring sticking and exhaust port blocking
- Improves throttle response
- Smokeless
- Reduces emissions
- Minimizes deposit formation
- Delivers outstanding protection and performance at lean mix ratios
- Anti-rust formulation counteracts the damp environments often encountered in two-stroke applications
- 100 to 1 gas oil mix ratio satisfies different two-cycle engine manufacturers
- Saves time and money while delivering the ultimate convenience and engine protection
- Stabilizes fuel for off-season storage
- API TC, ISO-L-EGD, JASO FD oils
-
AMSOIL Saber Professional Full Synthetic 2-Stroke Premix Oil Product Code Pkg/Size ATPPK-EA 1.5-Ounce Pack ATPPK-CA 1.5-Ounce Pack (case of 48) ATPBA-EA 3.5-Ounce Bottle ATPBA-CA 3.5-Ounce Bottles (case of 12) ATPBC-EA 8-Ounce Bottle ATPBC-CA 8-Ounce Bottles (case of 12) ATPQT-EA Quart Bottle ATPQT-CA Quart Bottles (case of 12) ATP1G-EA Gallon Bottle ATP1G-CA Gallon Bottles (case of 12) ATP30-EA 30-Gallon Drum ATP55-EA 55-Gallon Drum -
It’s Not A Mistake! AMSOIL Saber 2-Stroke Synthetic Oils Are Formulated to Be Mixed at the Economical 100 to 1 Gas Oil Mix Ratio
The most striking thing to most customers about AMSOIL Saber Full Synthetic 2-Stroke Premix Oils are their 100 to 1 mix ratios. Why can AMSOIL Saber be mixed at 100 to 1 while other two stroke oils are mixed at anywhere from 50 to 1 to 32 to 1? It’s no mystery. The answer has to do with solvents, or in this case a lack of them. Solvents often comprise as much as 20 to 30 percent of a conventional premix two stroke oil. However, AMSOIL Saber Synthetic 2-Stroke Oils use a proprietary formulation that makes use of esters and no solvents. This technology actually delivers solvency characteristics while improving lubricity. Since AMSOIL Saber is 100 percent active, it can be mixed at the economical 100 to 1 gas oil mix ratio. AMSOIL Saber Synthetic 2-Stroke Premix Oils are very cost effective compared to oils with a 50 to 1 mix ratio or richer.
One Premix Ratio For Everything Eliminates 2-Stroke Oil Mix Ratio Confusion
AMSOIL Saber Premix Oils offer outstanding protection and performance at lean mix ratios referred to as the Saber Ratio™. Using the Saber Ratio™ (see Oil Mix Ratio Chart below) eliminates the need for mixing different ratios for different equipment. Because one gas oil mix ratio satisfies multiple pieces of equipment, AMSOIL Saber Professional and AMSOIL Saber Outboard 2-Stroke Oils eliminate two-cycle premix ratio confusion.
Reduce 2-Stroke Engine Emissions – Far Less Smoke and Odor
AMSOIL Saber 2-Stroke Premix Oils are ideal for the environmentally conscious. Their clean burn characteristics reduce exhaust emissions dramatically. AMSOIL Saber Professional passes the industry-standard smoke test at the standard rich mix ratio. When mixed at the Saber Ratio™, smoke is virtually undetectable. Equipment operators subjected to smoke and fumes benefit from these low-emission properties.
Prevent 2-Stroke Engine Deposits
Extensive testing at lean mix ratios shows that the premium synthetic formulations of AMSOIL Saber Premix Oils offer superior lubricity and cleanliness properties, controlling friction and preventing wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Saber Professional 2-Stroke Premix Oil is formulated with high-temperature detergent additives that prevent hard carbon deposits from forming and prevent ring sticking in the hot operating engines of small outdoor power equipment and other two-cycle applications.
Excellent Protection Against Engine Rust During Off-Season Storage
AMSOIL Saber Professional 2-Stroke Premix Oil features an anti-rust formulation to counteract the damp environments often encountered in two-cycle applications. Its superior rust and corrosion inhibitors provide two-cycle engines with excellent rust protection, even during off-season storage.
Fuel Stabilization
AMSOIL Saber Professional 2-Stroke Premix Oil provides the additional benefit of fuel stabilization to help prevent fuel from deteriorating during storage and causing poor engine performance. There is no need to add an additional fuel stabilizer when putting equipment into seasonal storage.
Applications
AMSOIL Saber Professional Synthetic 2-Stroke Premix Oil (ATP) has a performance emphasis on the hotter operations of premix, air-cooled engines and is specifically designed for hand-held power equipment including, but not limited to, chain saws, trimmers, lawn equipment, snow blowers, leaf blowers, weed eaters/weed wackers, brush cutters, edgers, shredder vacs, chop saws and pumps.
Saber Professional has been tested and proven to provide premium protection and performance at 100 to 1 mix ratios, however is it recommended for any gas oil mix ratio up to 100 to 1. When tested at half the treat rate for conventional oils (100 to 1 vs. 50 to 1), Saber Professional easily passed the industry-standard lubricity test.
- Use at conventional mix ratios or the Saber Ratio™, regardless of the mix ratio specified for the equipment. For maximum benefit, use the Saber Ratio™. (See Oil Mix Ratio Chart below.)
- Available in a 3.5-ounce container, which is ideal for treating the 2 to 2.5-gallon gas cans commonly used for storing mixed gas on the job.
Attention Power Sports Enthusiasts!
AMSOIL Online Application Guides contain lube and filter specifications for motorcycles, ATVs, UTVs, snowmobiles, PWC (personal watercraft) and marine outboards.API TC, JASO FD and ISO-L-EDG Oil
AMSOIL Saber Professional Synthetic 2-Stroke Premix Oil meets or exceeds the following performance test requirements and may be used in 2-stroke engines requiring oils meeting these specifications.
- API TC
- ISO-L-EGD
- JASO FD
Shipping for Online and Catalog Customers
Online and catalog customers receive FREE standard ground shipping on orders of $100 or more when shipped to a valid address in the continental United States, including APO and FPO military post boxes. AMSOIL does not ship to PO Boxes. The $100 minimum does not include taxes, fees or other charges. For online and catalog retail orders totaling less than $100, a flat shipping rate of $8.50 will apply in the continental U.S.
Please Note: AMSOIL Dealers and Preferred Customers are not eligible for free shipping. Orders containing only clothing and promotional materials totaling less than $20 are subject to $5 shipping and handling.
For more information, please visit the AMSOIL, Inc. website: AMSOIL Shipping, Sales Tax and Product Return Guidelines
Return Policy
Please visit the AMSOIL, Inc. website: AMSOIL Shipping, Sales Tax and Product Return Guidelines